<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:dc="http://purl.org/dc/elements/1.1/" version="2.0">
  <channel>
    <title>DSpace Collection: Thesis published in Dept. of C.E.</title>
    <link>http://103.99.128.19:8080/xmlui/handle/123456789/18</link>
    <description>Thesis published in Dept. of C.E.</description>
    <pubDate>Tue, 17 Nov 2026 17:12:23 GMT</pubDate>
    <dc:date>2026-11-17T17:12:23Z</dc:date>
    <item>
      <title>PERFORMANCE OF NANO SILICA GEL PRODUCED FROM  RISE HUSK ASH (RHA) IN CEMENTITIOUS MEDIA</title>
      <link>http://103.99.128.19:8080/xmlui/handle/123456789/609</link>
      <description>Title: PERFORMANCE OF NANO SILICA GEL PRODUCED FROM  RISE HUSK ASH (RHA) IN CEMENTITIOUS MEDIA
Authors: BARUA, BAKUL; ID:, 21MCE031P
Abstract: This study investigates the use of Nano-Silica Gel (NSG) derived from Rice Husk &#xD;
Ash (RHA) as a sustainable alternative in cement-based composites. RHA, rich in &#xD;
amorphous silica, is an eco-friendly source for NSG production, which can enhance &#xD;
cement performance and reduce environmental impact. Experimental tests were &#xD;
conducted on pastes and mortars by replacing cement with NSG dosages of 1%, 2%, &#xD;
3%, and 5% to evaluate flowability, density, setting time, compressive strength, &#xD;
flexural strength, shrinkage, soundness, electrical resistivity, and pozzolanic activity. &#xD;
Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) were also used to &#xD;
analyze microstructural changes at 7, 28, and 90 days. &#xD;
Results showed that 1% NSG significantly improved compressive strength (53.9 &#xD;
MPa) and flexural strength (6.94 MPa) at 90 days, compared to the control mix. This &#xD;
improvement is due to the highly reactive nature of NSG, which accelerates the &#xD;
formation of calcium-silicate-hydrate (C-S-H) gel, enhancing the matrix and pore &#xD;
structure. However, higher NSG dosages (≥3%) decreased strength and stability due &#xD;
to increased water demand and particle agglomeration. Pozzolanic activity was &#xD;
moderate at 1–2% NSG but declined at 5%. The Frattini test confirmed moderate &#xD;
pozzolanic activity at lower dosages; however, the benefits diminished at the highest &#xD;
replacement level (5%). Lower NSG levels improved electrical resistivity, while &#xD;
higher dosages increased porosity. In conclusion, NSG derived from RHA could be &#xD;
a viable and effective supplementary cementitious material when used at optimal &#xD;
replacement levels. Specifically, a 1% NSG substitution shows the best balance of &#xD;
enhanced strength and other relevant properties. The use of RHA-derived NSG also &#xD;
contributes to sustainability goals by reducing the demand for cement, an energy&#xD;
intensive material. This work offers valuable insights into advancing sustainable &#xD;
practices in the construction industry by promoting waste utilization and reducing &#xD;
the carbon footprint associated with cement production.
Description: A Master of Engineering  (M.Engg.) thesis submitted to the Department of Civil Engineering (CE), Chittagong University of Engineering and Technology (CUET).</description>
      <pubDate>Wed, 30 Jul 2025 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">http://103.99.128.19:8080/xmlui/handle/123456789/609</guid>
      <dc:date>2025-07-30T00:00:00Z</dc:date>
    </item>
    <item>
      <title>SUITABILITY OF MODIFIED BINDERS FOR SUSTAINABLE  FLEXIBLE PAVEMENT CONSTRUCTION IN CONTEXT OF  BANGLADESH</title>
      <link>http://103.99.128.19:8080/xmlui/handle/123456789/607</link>
      <description>Title: SUITABILITY OF MODIFIED BINDERS FOR SUSTAINABLE  FLEXIBLE PAVEMENT CONSTRUCTION IN CONTEXT OF  BANGLADESH
Authors: Mayin, Md. Hafiz-Al
Abstract: 60/70 bitumen is used as the main binder in pavement construction of Bangladesh &#xD;
which experiences numerous types of defects require frequent maintenance and are &#xD;
extremely vulnerable to traffic loading, moisture damage and temperature changes. &#xD;
Hence, an effort has been made to enhance the bitumen quality by adding &#xD;
modifiers with the neat bitumen. And also, bituminous concrete mixes have been &#xD;
evaluated for some performance parameters to justify the bitumen quality. On the &#xD;
other hand, vehicles are increasing approximately 0.5 million per year in &#xD;
Bangladesh with the increase of life standard, country development, economic &#xD;
zones, population and road network which produce a significant amount (150,000 &#xD;
tons) of non-biodegradable waste tires. It may be advantageous for the &#xD;
environment and the economy by using this waste material as a bitumen modifier, &#xD;
producing Crumb Rubber Modified Bitumen (CRMB). Polymer Modified Bitumen &#xD;
(PMB) is used in many countries over the world due to its enhanced properties, so &#xD;
it has also been considered to verify the suitability over neat binder and CRMB. &#xD;
The research includes laboratory investigation of binders (60/70, PMB &amp; CRMB) &#xD;
properties and found CRMB has more enhanced. Marshall mix design approach &#xD;
has been used to determine the Marshall properties and Optimum Bitumen &#xD;
Content (OBC). The OBC’s of bituminous mixes prepared by neat 60/70 bitumen, &#xD;
PMB, and CRMB were found to be 5.05%, 5.10% and 5.30% respectively. The &#xD;
retained stability of 60/70 bitumen, PMB, and CRMB mixtures were found to be &#xD;
79.0%, 92.6% and 95.0% respectively. Based on Indirect Tensile Strength (IDT) test, &#xD;
the Tensile Strength Ratio (TSR) values for the respective mixtures were found to &#xD;
be 84.0%, 94.4% and 93.2%. Again, based on moisture induced damage test, the TSR &#xD;
values were found to be 83.1%, 90.1% and 93.0% for the respective bituminous &#xD;
mixes. &#xD;
The modified bitumen showed higher softening point, higher elastic recovery, &#xD;
lower temperature susceptibility and lower stripping value. Moreover, higher &#xD;
resistance to moisture induced damage and retained stability were observed for the &#xD;
modified bituminous mixes. Finally, it can be concluded that, the performance of &#xD;
modified binders are better than that of neat 60/70 bitumen as they are less &#xD;
susceptible to temperature and moisture, causing less maintenance and &#xD;
rehabilitation costs over the pavement's lifespan. Since the CRMB performed best &#xD;
out of the two modified bitumen, it can be considered as a sustainable alternative &#xD;
for durable and effective road development in Bangladesh.
Description: A Master of Engineering (M.Engg) Thesis in Civil Engineering (CE) Department at Chittagong University of Engineering and Technology (CUET).</description>
      <pubDate>Tue, 22 Jul 2025 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">http://103.99.128.19:8080/xmlui/handle/123456789/607</guid>
      <dc:date>2025-07-22T00:00:00Z</dc:date>
    </item>
    <item>
      <title>PERFORMANCE OF PERVIOUS ASPHALT  PAVEMENT USING WASTE POLYETHYLENE  MODIFIED BINDER</title>
      <link>http://103.99.128.19:8080/xmlui/handle/123456789/606</link>
      <description>Title: PERFORMANCE OF PERVIOUS ASPHALT  PAVEMENT USING WASTE POLYETHYLENE  MODIFIED BINDER
Authors: Halder, Shovon
Abstract: The escalating demand for sustainable and resilient pavement solutions, &#xD;
coupled with growing environmental concerns regarding polyethylene waste, &#xD;
has catalyzed the exploration of innovative materials within pavement &#xD;
engineering. This study undertook an experimental evaluation of pervious &#xD;
asphalt pavement utilizing waste polyethylene-modified bitumen to enhance &#xD;
mechanical strength and functional durability, while promoting sustainable &#xD;
waste repurposing. In Bangladesh, where the rainy season lasts nearly seven to &#xD;
eight months, conventional pavements face persistent drainage challenges and &#xD;
reduced lifespan.  &#xD;
In this study, 60/70 penetration grade bitumen was modified by &#xD;
incorporating 3%, 4%, 5%, and 6% waste polyethylene by weight. Binder tests—&#xD;
including penetration, softening point, ductility, viscosity, temperature &#xD;
susceptibility, and others—revealed that 4% polyethylene addition produced the &#xD;
most favorable results. The modified binder exhibited enhanced stiffness and &#xD;
lower susceptibility to temperature changes, with penetration values ranging &#xD;
from 11 at 5°C to 49 at 35°C, compared to 6 to 152 for unmodified bitumen. The &#xD;
optimum binder content (OBC) was determined to be within the range of 5.25&#xD;
5.4%, based on Cantabro abrasion and draindown test results. The mix satisfied &#xD;
the Cantabro loss threshold of 15% and the maximum allowable draindown limit &#xD;
of 0.3%, as per MS-2. The air void content was also verified to be within the range &#xD;
of 18–22%, ensuring adequate permeability. &#xD;
Performance tests showed that polyethylene-modified mixes outperformed &#xD;
conventional mixes. Dry Marshall stability increased from 1.86 kN to 4.70 kN, &#xD;
and retained stability improved from 71.5% for the neat binder to 90.4% for the &#xD;
v&#xD;
modified mix, exceeding the minimum requirement of 75%. The Tensile Strength &#xD;
Ratio (TSR) also improved from 85% to 97%, indicating higher resistance to &#xD;
moisture damage. The coefficient of permeability increased from 3 mm/s in &#xD;
conventional mixes to 4.2 mm/s in modified mixes, confirming improved &#xD;
infiltration potential. &#xD;
These findings confirm that incorporating waste polyethylene enhances the &#xD;
structural and functional performance of pervious asphalt pavement, while also &#xD;
addressing environmental waste concerns. The proposed mix shows promise for &#xD;
low-volume roads and parking lots, particularly in high-rainfall regions, and &#xD;
offers a basis for future field applications and study.
Description: A Master of Science (M.Sc) Thesis in Civil Engineering (CE) Department at Chittagong University of Engineering and Technology (CUET).</description>
      <pubDate>Tue, 22 Jul 2025 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">http://103.99.128.19:8080/xmlui/handle/123456789/606</guid>
      <dc:date>2025-07-22T00:00:00Z</dc:date>
    </item>
    <item>
      <title>PERFORMANCE OF FERROCEMENT ANGLE TO RETROFIT THE PARTIALLY DAMAGED RC  COLUMN</title>
      <link>http://103.99.128.19:8080/xmlui/handle/123456789/605</link>
      <description>Title: PERFORMANCE OF FERROCEMENT ANGLE TO RETROFIT THE PARTIALLY DAMAGED RC  COLUMN
Authors: Masum, A. K. M.
Abstract: Reinforced concrete (RC) columns are the most crucial building component in&#xD;
concrete buildings, resisting both gravity and lateral loads. Therefore, their&#xD;
effective retrofitting technique is a burning topic in the scientific community. This&#xD;
research investigates the performance of prefabricated ferrocement angles (PFAs)&#xD;
as a retrofitting solution for damaged RC columns. A total of 18 scaled-down&#xD;
square columns of three different concrete strengths of 36.40 MPa, 34.20 MPa and&#xD;
31.40 MPa were experimentally investigated. The strength of the ferrocement&#xD;
used to make the PFAs was 39 MPa. Each concrete strength group consists of 6&#xD;
columns: 1 control, 1 control pre-cracked, 2 retrofitted with single-layer wire&#xD;
mesh PFAs and 2 retrofitted with double-layer wire mesh PFAs. The complete&#xD;
retrofitting procedures involved the external application of PFAs at the column&#xD;
corners with bonding agents, joining the PFAs with each other by sewing wire&#xD;
meshes and filling the voids between PFAs with high-strength mortar. The&#xD;
specimens were tested under displacement-controlled axial loading and&#xD;
performance in regard to ultimate load capacity, stiffness, energy absorption,&#xD;
ductility and failure patterns were evaluated.&#xD;
&#xD;
The application of PFAs significantly increased the axial load capacity of the pre-&#xD;
cracked RC columns. Increasing the layer of wire mesh also increased the gain of&#xD;
&#xD;
axial load capacity by almost 50%. This increase was found to be more for RC&#xD;
columns of the higher concrete strength group, indicating the dependence of the&#xD;
axial load capacity increase after PFA jacketing on the actual concrete strength of&#xD;
&#xD;
the RC columns. PFA jacketing also helped to retain the stiffness of the pre-&#xD;
cracked samples while allowing greater lateral and axial deformation. Jacketing&#xD;
&#xD;
the pre-cracked columns with PFAs increased their energy absorption capacity&#xD;
by more than 100%. The proposed jacketing method of RC columns with PFAs&#xD;
&#xD;
viii&#xD;
&#xD;
also improved their ductility via the confinement effect, ensuring higher plastic&#xD;
deformation and preventing brittle failure.
Description: A Master of Engineering (M.Engg) Thesis in Computer Engineering(CE) Department at Chittagong University of Engineering and Technology (CUET).</description>
      <pubDate>Sun, 26 Oct 2025 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">http://103.99.128.19:8080/xmlui/handle/123456789/605</guid>
      <dc:date>2025-10-26T00:00:00Z</dc:date>
    </item>
  </channel>
</rss>

