Please use this identifier to cite or link to this item: http://103.99.128.19:8080/xmlui/handle/123456789/614
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHASAN, MURTAJA-
dc.contributor.authorID:, 16MME025P-
dc.date.accessioned2026-11-10T04:06:02Z-
dc.date.available2026-11-10T04:06:02Z-
dc.date.issued2025-08-26-
dc.identifier.urihttp://103.99.128.19:8080/xmlui/handle/123456789/614-
dc.descriptionA Master of Science (M.Sc) Thesis in Mechanical Engineering (ME) Department at Chittagong University of Engineering and Technology (CUET).en_US
dc.description.abstractNatural fibers have been used as reinforcement in composite development over synthetic fiber in the recent years due to the biodegradability, sustainability, availability, recyclability and clean environment. This study examines the prospect of jute fiber using as reinforcement in High-Density Polyethylene (HDPE) composites. Three different fiber weight fractions of 5%, 10% and 20% have been considered and termed as HDPEDJ-5, HDPEDJ-10, and HDPEDJ-20, correspondingly. Jute fiber was chemically treated as a part of the surface modification using 5% NaOH to adhere the bonding between reinforcement and matrix. Injection molding technique has been employed to prepare the samples as per the ASTM standards. The effect of the amount of fiber on composite performance was investigated through tensile strength, impact strength and hardness. In mechanical characterization, the HDPEDJ-10 sample provided better results by showing 25.5 MPa of tensile strength and 3.15 kJ/m2 of impact strength, whereas HDPEDJ-5 sample exhibited maximum Rockwell hardness of 90.9 RHB. It was observed from the data that the mechanical properties of the material improved as the content of jute fiber increased, which posits this eco-friendly composite as a potential candidate for industrial usage.en_US
dc.description.sponsorshipN/Aen_US
dc.language.isoenen_US
dc.publisherCUETen_US
dc.relation.ispartofseries;Tmail-10-
dc.subjectJute Fiber-Reinforced Compositesen_US
dc.subjectHigh-Density Polyethylene (HDPE)en_US
dc.subjectNatural Fiber Compositesen_US
dc.subjectAlkali Treatmenten_US
dc.subjectSodium Hydroxide (NaOH) Treatmenten_US
dc.subjectInjection Moldingen_US
dc.titleExperimental Analyses and Characterization of Natural Fiber Reinforced Polymer Composites Produced by Injection Molding Methoden_US
dc.typeThesisen_US
Appears in Collections:Thesis in M.E.

Files in This Item:
File Description SizeFormat 
26.08.2025_Tmail-10_Murtaja Hasan_16MME025P.pdfA Master of Science (M.Sc) Thesis in Mechanical Engineering (ME) Department at Chittagong University of Engineering and Technology (CUET).4.24 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.