Please use this identifier to cite or link to this item: http://103.99.128.19:8080/xmlui/handle/123456789/620
Title: Steelmaking Operation and Refining Process of Electric Arc Furnace (EAF) in Melting Plant
Authors: Billah, Atikuzzaman
ID:, 16MME028P
Keywords: Electric Arc Furnace (EAF)
Steelmaking Process
Direct Reduced Iron (DRI)
Steel Scrap Utilization
Raw Material Optimization
Specific Electrical Energy Consumption
Issue Date: 4-Sep-2025
Publisher: CUET
Series/Report no.: ;Tmail-13
Abstract: Steel production through electric arc furnace (EAF) technology has emerged as an essential process in contemporary metallurgy, particularly in terms of its adaptability and resource flexibility. The EAF represents one of the most prevalent methods for steel manufacturing, primarily utilized in the casting and rolling phases within steel plants. The inception of the first EAF dates back to the early 20th century. The inherent versatility of the electric arc furnace allows it to cater to the dynamic demands for steel materials, which has facilitated the development of mini steel plants focused on producing various grades of steel products from steel scrap and alternative charge materials. In EAF operations, steel scrap serves as the principal raw material; however, challenges such as limited scrap availability and the need for low-residual or high-purity iron sources have necessitated the incorporation of direct reduced iron (DRI), hot briquetted iron (HBI), pig iron, and hot metal in the steelmaking process. Significant advancements in the operational aspects of EAF steel production have enhanced its contribution to global steel output. According to the World Steel Association, electric arc furnaces account for approximately 30% to 35% of the total steel production worldwide. Over the past three decades, numerous innovations in EAF steelmaking have been implemented to minimize power consumption, optimize tap-to-tap timings, reduce electrode usage, and lessen refractory wear. This study critically analyzes the steelmaking and refining processes employed at AbulKhair Steel (AKS) melting plant in Bangladesh. An examination of the significance of raw materials in the steelmaking process forms a central component of this research. Various parameters, including specific electrical energy consumption, tap-to-tap timing, lime consumption, carbon consumption, and electrode consumption, were examined across four distinct charging mixture ratios (MR). A comparative analysis of these parameters was conducted graphically, with a focus on determining the most cost-effective and productive mixture ratio for the steelmaking process. Among the evaluated mixtures, the MR-2, consisting of 87.7% scrap (comprising 67.7% shredded scrap and 20% heavy melting scrap) and 12.3% pig iron, demonstrated the most favorable results, establishing its efficiency relative to the other raw material mixtures examined. The findings indicate that the lowest specific power consumption, tap-to-tap (TTT), and electrode consumption were recorded for MR-2, in contrast to the other ratios. In contrast, MR-4 exhibited the highest specific electrical energy consumption, TTT, lime consumption, and electrode consumption. Interestingly, carbon consumption was highest in MR-1, which contained a significant amount of scrap with 10% hot briquetted iron (HBI) and 5% pig iron. The presence of FeO in HBI necessitates greater carbon consumption to produce carbon monoxide (CO) gas.
Description: A Master of Engineering (M.Engg.) Thesis in Mechanical Engineering (ME) Department at Chittagong University of Engineering and Technology (CUET).
URI: http://103.99.128.19:8080/xmlui/handle/123456789/620
Appears in Collections:Thesis in M.E.

Files in This Item:
File Description SizeFormat 
04.09.2025_Tmail-13_Atikuzzaman Billah_16MME028P.pdfA Master of Engineering (M.Engg.) Thesis in Mechanical Engineering (ME) Department at Chittagong University of Engineering and Technology (CUET).6.12 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.