Electrical & Electronics Engineering (EEE): Recent submissions

  • Quantitative Deviation of Spatial Parameters of Gait in Parkinson’s Disease 
    Dewanjee, Adharaa Neelim; Hossain, Quazi Delwar; Muhury, Anik (SSN College of Engineering, Department of Electronics and Communication Engineering, IEEE, 2019-03-21)
    Parkinson’s disease is a neurological disease which prevails in a patient for the long term. Losing control over the gait cycle is a common phenomenon which leads to a deviation in the gait cycle of the patient. The ...
  • Weather Independent Positioning of MS Using Power Slope Patterning Algorithm via One BS 
    Bhattacharjee, Avra; Islam, Md. Rafi; Ullah, Muhammad Ahsan (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Numerous methods have been applied to accurately determine the location of a mobile station (MS), of which, most of them require weather dependent parameters. An efficient method of positioning and mapping a mobile station ...
  • Performance Analysis of a Microstrip Patch Antenna for Biomedical Applications 
    Akbar, Md. Ali; Chakraborty, Swarup; Islam, Akib Jayed; Farhad, Md. Mehedi; Gani, Md. Manjurul (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    A microstrip patch antenna’s design and performance analysis for biomedical applications which operating at 2.45 GHz frequency range in ISM Band (2.4 GHz to 2.5 GHz) is represented in this paper. The antenna’s ...
  • Optimization of Lead Sulfide (PbS) Solar Cell 
    Dey, Mrinmoy; Omar, Md.Tawfiq; Das, Ashim Kumar; Dey, Maitry; Das, Nipu Kumar (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Renewable energy is known as the clean and green energy. Solar energy is one of those in this modern era. Lead Sulfide (PbS) is one of the most suitable semiconductor materials which absorption coefficient is high. It ...
  • Optimization of Features for Classification of Parkinson’s Disease from Vocal Dysphonia 
    Farzana, Walia; Hossain, Dr.Quazi Delwar (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Parkinsons disease is considered most prominent neurological disease after Alzheimer and Epilepsy. There is no defined test for early diagnosis of Parkinson’s patient and medical decisions are provided based on the ...
  • Optimization of AlSb Solar Cell to Improve PCE 
    Dey, Maitry; Chakma, Rishita; Dey, Mrinmoy; Das, Nipu Kumar (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    This research work investigates the new prospects in Aluminium Antimonide (AlSb) compound solar cell by numerical analysis. AlSb is a material of binary compound semiconductor group with suitable electrical and optical ...
  • Optimal Energy Mix and Operation Cost in the Presence of Nuclear and Solar PV Generation 
    Hossain, Showkat; Rahaman, Mufrad; Tasnim, Israt; Mohammad, Nur (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    This paper investigates electrical energy mix and operation cost in Bangladesh for sustainable development. Projecting tentative energy demand by the year of 2025, the aspect of economic load dispatch is discussed. ...
  • Modeling and Designing a Genetically Optimized PID Controller for Separately Excited DC Motor 
    Gani, Md. Manjurul; Isalm, Dr. Md. Saiful; Ullah, Dr. Muhammad Ahsan (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    This paper presents an intelligent method to design a proportional-integral-derivative (PID) controller to control the speed of a separately excited DC motor (SEDCM). There are various artificial intelligent (AI) based ...
  • Manipulation and Analysis of a 4-DOF Robotic Arm Using a Peer-Peer Messaging System 
    Raihan, Md. Kaiser; Alvee, Hameed Hasan; Hossain, Mohammad Rubaiyat Tanvir (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    The robotic arm is a mechanical complex system noticeably used for multiple industrial applications, medical and personal applications to make complex task easier and safer. This research work depicts the simulation ...
  • Electric Power Generation-Mix for Bangladesh and Its Future 
    Nath, Anik; Barua, Sujoy; Mohammad, Nur (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Bangladesh is a developing country and over populated nation using electricity 80% of people. Electricity demand is gradually rising day by day. Electric power generation-mix is share sources from where electricity produces. ...
  • Efficient Mental Arithmetic Task Classification using Wavelet Domain Statistical Features and SVM Classifier 
    Pathan, Naqib Sad; Foysal, Mahir; Alam, Md. Mahbubul (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Functional Near Infrared Spectroscopy (fNIRS) has been emerged as a potential technique in the research of BCI. In this paper, we proposed a discrete wavelet transform based feature extraction technique to classify ...
  • Design and Performance Studies of an Elliptical Slot Circular Polarization Antenna for C-Band Wireless Applications 
    Chakraborty, Swarup; Hossain, Md. Azad; Rahman, Muhammad Asad (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    A novel and subtle design of a circularly polarized microstrip line feed elliptical slot monopole antenna with an intention to use in C-Band (4-8 GHz) is proposed in this communication. Due to notable as well as ...
  • Effect of Cd1-xZnxS Window Layer Incorporation in CdTe Solar Cell by Numerical Simulation 
    Das, N. K.; Sengupta, A. K.; Dey, Mrinmoy; Rahman, K. S.; Matin, M. A.; Amin, N. (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    CdTe is a very potential binary semiconductor material for solar photovoltaic application due to its superior optoelectronic properties. The overall performances of incorporating Cd1-xZnxS window layer in lieu of CdS ...
  • Comparative Study of Levelized Cost of Electricity (LCOE) for Concentrating Solar Power (CSP) and Photovoltaic (PV) Plant in the Southeastern Region of Bangladesh 
    Roni, Md. Masum; Hoque, Injamam Ul; Ahmed, Tofael (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Most of the renewables particularly Solar PV are intermittent. For this, dispatchable energy sources are required in the energy mix. Concentrated Solar Power (CSP) is dispatchable in nature. The aim of this work is ...
  • An Outlook over Electrical Energy Generation and Mixing Policies of Bangladesh to Achieve Sustainable Energy Targets -Vision 2041 
    Hasan, Md. Kamrul; Mohammad, Nur (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    This paper presents an outlook on the power generation and mixing policies taken by the Government of Bangladesh (GOB) to remove energy crisis and ensure energy access. Electricity generation and fulfilling people’s ...
  • Deposition of CdS Thin Film by Thermal Evaporation 
    Dey, Maitry; Das, N. K.; Gupta, A. K. Sen; Dey, Mrinmoy; Hossain, M. S.; Matin, M. A.; Amin, N. (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    The CdS thin film is widely used for various applications such as in solar cells, optoelectronic devices, LEDs, photonics devices etc. The ultra-thin CdS layer is commonly used as by layer or as window layer for CdTe, ...
  • Design and Numerical Analysis of Efficient Gallium Arsenide Solar Cell with Graphene as Window Layer Material 
    Dey, Maitry; Rahman, Nazia; Tasnim, Iffat; Dey, Mrinmoy; Das, Nipu Kumar (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Different semiconductor materials are used to design solar cell and among them, Gallium Arsenide (GaAs) has currently more preferable causes it has several unique properties such as flexibility, the wider and direct ...
  • Design and Optimization of an Efficient Molybdenum Disulfide (MoS2) Solar cell with Tin Sulfide BSF 
    Mrinmoy Dey; Md. Fahim Shahriar; Arman Ali; Maitry Dey; Nipu Kumar Das (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Two-dimensional molybdenum disulfide (MoS2) is a potential sunlight harvester due to low cost, layered type atomic structure, favorable electrical and optical properties. The performance of a molybdenum disulfide (MoS2) ...
  • An Efficient Technique for Detection and Enhancement of Blood Vessels from Cardiac MRI 
    Kabir, Ramisa Ibdita; Ullah, Dr. Muhammad Ahsan; Taru, Mosammat Sumaiya (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Cardiovascular diseases, mainly caused by stenosis or aneurysms of arteries, are the leading reasons of death worldwide. Angiography, which is not only invasive but also risky, painful and costly, is the common method ...
  • Affordable Electricity for Bhashan Char from Renewable Energy 
    Sunny, M. J. M.; Rahman, M. A.; Matin, Dr. M. A. (Faculty of Electrical and Computer Engineering, CUET, 2019-02-07)
    Bangladesh is a developing country with energy problem causing various after effects like load shedding, energy distribution & transmission. Major problem is population and adding more population may end in more scarcity ...

Search DSpace


Advanced Search

Browse

My Account