Multiple Strip Photo Mixing Demodulator for 3D Imaging  Implemented on High Resistivity Silicon

Hossain, Quazi Delwar; Betta, Gian-Franco Dalla; Pancheri, Lucio; Stoppa, David; Dhar, Sagar Kumar

CUET Digital Home
→
Electrical & Electronics Engineering (EEE)
→
proceedings in EEE
→
proceedings in EEE
→
View Item

dc.contributor.author	Hossain, Quazi Delwar
dc.contributor.author	Betta, Gian-Franco Dalla
dc.contributor.author	Pancheri, Lucio
dc.contributor.author	Stoppa, David
dc.contributor.author	Dhar, Sagar Kumar
dc.date.accessioned	2023-12-18T04:23:42Z
dc.date.available	2023-12-18T04:23:42Z
dc.date.issued	2012-12-20
dc.identifier.isbn	9781467314367
dc.identifier.uri	http://103.99.128.19:8080/xmlui/handle/123456789/372
dc.description.abstract	In this paper a multiple strip photo mixing demodulator fabricated on high resistivity silicon is described. The performance such as DC characteristics, demodulation contrast and non-linearity problem of a test sample are simulated and experimentally estimated. The experimental results exhibit a good DC charge separation and good dynamic demodulation capabilities up to 30MHz. The influence of modulation frequency and voltage on this device is also discussed. This test device corresponds to the first step towards incorporating a high resolution Time of Flight (TOF) based 3D image sensor.	en_US
dc.description.sponsorship	IEEE	en_US
dc.language.iso	en	en_US
dc.publisher	Department of Electrical and Electronics Engineering, Bangladesh University of Engineering & Technology	en_US
dc.relation.ispartofseries	ICECE;
dc.subject	Time of flight	en_US
dc.subject	3D imaging	en_US
dc.subject	Photo mixing demodulator	en_US
dc.title	Multiple Strip Photo Mixing Demodulator for 3D Imaging Implemented on High Resistivity Silicon	en_US
dc.title.alternative	7th International Conference on Electrical and Computer Engineering	en_US
dc.title.alternative	ICECE 2012	en_US
dc.type	Article	en_US