Recently added

International Conference on Mechanical Engineering 2013

Bangladesh University of Engineeing and Technology (Dept of Mechanical Engineering, BUET., 2014-06-20)

Evaluation of a Wells Turbine Model for Ocean Wave Energy Conversion using Oscillating Water Column

Ahmed, Rasel; Rahman, Kazi Afzalur; Hridoy, Monowar Wadud (Department of Mechanical Engineering, KUET, 2020-12-19)

Wave energy of oceans has a large potential to harness energy all over the world. Most of the wave energy extracting devices are based on the oscillating water column (OWC) technique. This study done on a small scale ...

An Experimental Study on Wheel Alignment and Shock Absorber Conditions for Fuel Performance Analysis of a Light Vehicle

Das, Riton Kumer; Hossain, Md. Abu Mowazzem; Islam, Md. Tazul; Banik, Sajal Chandra (Department of Mechanical Engineering, KUET, 2020-12-19)

In this study, an EHCO PLUS- 2ZZ-GE-02 model light vehicle was used to analyze the fuel performance with the consideration of the effect of wheel alignment and shock absorber conditions. In the experimental setup, a ...

A Numerical Study on Interaction of A0-mode Lamb Wave with Cylindrical Hole in CFRP Composite Laminates

Rabbi, M S; Teramoto, K; Khan, T I (Department of Mechanical Engineering, KUET, 2020-12-19)

This study represents the interaction of A0-mode Lamb wave at a cylindrical hole in composite laminates focusing on its scattering characteristics. A 3-dimensional Finite Element Modeling (FEM) is used to discuss the ...

NUMERICAL AND EXPERIMENTAL INVESTIGATIONS ON THE INFLUENCE OF SURFACE MODIFICATIONS INTEGRATED WITH VORTEX GENERATORS ON NACA0010 AIRFOIL

Srijan Dasgupta; Kazi Afzalur Rahman; Md. Kawsar Sajib; Md. Ibrahim Khalil Tanim (Department of Mechanical Engineering, 2022-10)

Vortex generators and surface modifications are done to reduce the wake region and increase the aerodynamics efficiencies of an airfoil. The performance test of NACA0010 airfoil with various types of surface modifications ...

PERFORMANCE ANALYSIS OF R32/R600a BLEND WITH TiO2/MO NANOFLUID FOR EXISTING RESIDENTIAL AIR CONDITIONING SYSTEM

Ahmed, M. I.; Ahamed, J. U.; Razzaq, M. E. A. (Department of Mechanical Engineering, 2022-10)

This experimental study investigated the energy and exergy performance of R32/R600a (50:50 by mass) with TiO2 nanofluid for a residential air conditioning system which was originally designed for R22. R32/R600a has ...

PRIORITIZING THE FACTORS INFLUENCED PARTICULATE MATTER EMISSION APPLYING FUZZY TOPSIS

Zerin, N.H.; Sayem, A.S.M. (Department of Mechanical Engineering, 2022-10)

Particulate matter (PM) is a key component of ambient air that has a significant influence on climate change and is harmful to human health. Particulate matter in the high atmosphere affects the earth's radiation, cloud ...

SYNTHESIS AND CHARACTERIZATION OF TiO2 AND ZnO NANOPARTICLES

Das, U. D.; Ahamed, J. U.; Hossain*, M. A. Mowazzem; Razzaq, M. E. A.; Dewanjee, S.; Jisu, R. N. (Department of Mechanical Engineering, 2022-10)

In this experimental study, TiO2 nanoparticles were synthesized using an ultrasound-assisted method, while the ZnO nanoparticles were fabricated using a chemical precipitation method. Results of X-ray diffraction ...

EFFECT OF WHEEL ALIGNMENT, SPEED AND ROAD CONDITION ON FUEL EFFICIENCY OF A LIGHT-DUTY VEHICLE

Das, R. K.; Hossain, M. A. Mowazzem; Islam, M. T.; Banik, S. C. (Department of Mechanical Engineering, 2022-10)

The fuel efficiency of a TOYOTA ECHO PLUS-2ZZ-GE-02 model light-duty vehicle was investigated experimentally based on the wheel alignment system. The light vehicle has been analyzed with the variation of vehicle speed ...

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF WAVE ENERGY HARVESTING THROUGH BUOY EFFECT

Hai, T. B.; Rahman, M.; Kabir, S. S.; Askary, M. A. H. A.; Rahman, Md. Arafat (Department of Mechanical Engineering, 2022-10)

Wave energy is a reliable source for power production from the perspective of certainty. The study focuses on determining an appropriate buoy structure of specific material to develop a mechanism to harvest wave energy ...

DEVELOPMENT OF A VOICE CONTROLLED ROBOTIC ARM

Kabir, Humayun; Banik, S. C.; Haque, M. T. Islam Akkas U. (The School of Applied Sciences and Technology, Shahjalal University of Science and Technology, 2011-01-11)

This paper describes a robotic arm with 5 degrees-of-freedom (DOF) which is controlled by human voice and has been developed in the Mechatronics Laboratory, CUET. This robotic arm is interfaced with a PC by serial ...

International Conference on Materials, Energy, Environment and Engineering (ICMEEE-2020)

Rabbi, Md. Sanaul; JUST, Dept. of Chemical Engineering; Pranta, M. H. (Jashore University of Science and Technology (JUST), 2020-11-29)

The vehicle braking system is considered to be one of the most important safety-critical systems in modern vehicles as its main purpose is to stop or decelerate the vehicle. The use of a specified braking torque on the ...

6th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE-2020)

Das, Riton Kumer; Hossain, Md. Abu Mowazzem; Islam, Md. Tazul; Banik, Sajal Chandra (Faculty of Mechanical Engineering, KUET, 2020-12-19)

In this study, an EHCO PLUS- 2ZZ-GE-02 model light vehicle was used to analyze the fuel performance with the consideration of the effect of wheel alignment and shock absorber conditions. In the experimental setup, a ...

International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME-2015)

RUET, Dept. of Mechanical Engineering (Rajshahi University of Engineering & Technology, 2015-12-11)

5th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE-2018)

KUET, Dept. of Mechanical Engineering (Khulna University of Engineering & Technology, 2018-12-23)

4th International Conference on Mechanical Engineering and Renewable Energy (ICMERE2017)

CUET (Dept. of Mechanical Engineering, CUET, 2017-12-18)

4th BSME-ASME International Conference on Thermal Engineering

BSME (BSME, 2008-12-27)

International Conference on Mechanical Engineering (ICME-2009)

BUET, Dept. of Mechanical Engineering (Dept. of Mechanical Engineering, BUET, 2009-12-26)

5th BSME International Conference on Thermal Engineering (ICTE 2012)

IUT, Dept. of Mechanical Engineering (Elsevier Ltd., 2012)

International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013)

RUET, Dept. of Mechanical Engineering (Rajshahi University of Engineering & Technology, 2013-11-01)

Recently added

Mechanical Engineering (M.E): Recent submissions

Search DSpace

Browse

All of DSpace

This Community

My Account