DSpace Repository

DESIGN OF A COMPACT MICROSTRIP ARRAY ANTENNA WITH SERIES-CORPORATE FEED BOTH-SIDED MIC NETWORK

Show simple item record

dc.contributor.author CHOWDHURY, SUVADRA
dc.contributor.author ID:, 15MEE008P
dc.date.accessioned 2026-11-18T03:58:06Z
dc.date.available 2026-11-18T03:58:06Z
dc.date.issued 2025-09-24
dc.identifier.uri http://103.99.128.19:8080/xmlui/handle/123456789/617
dc.description A Master of Science (M.Sc.) Thesis in Electrical and Electronic Engineering (EEE) Department at Chittagong University of Engineering and Technology (CUET). en_US
dc.description.abstract Research on microstrip patch antennas has increased noticeably over the last few years. Microstrip antennas present significant advantages and enhanced opportunities when compared to traditional antennas. They are lighter, occupy less space, are more cost-effective, have a lower profile, and are simpler to manufacture. Arrays enhance the overall gain, mitigate interference from specific directions, and optimize the signal-to-interference noise ratio (SINR). Arrays can be linear, circular, or planar. Planar arrays are remarkably versatile, with antenna elements arranged on a flat surface, yielding more symmetrical patterns with reduced side lobes and achieving much higher directivity. The focus of this research is to create a compact microstrip array antenna that employs a series-corporate feed dual-sided MIC network, aimed at functioning at a frequency of 10 GHz. Consequently, the primary target of this thesis is to create, analyze, and optimize a 2×4 microstrip array antenna. To explore this objective, the feeding distance of the 2×2 array corporate MIC feed on both sides (0.5λ, 0.55λ, 0.6λ, 0.65λ, 0.7λ, 0.75λ) is maintained consistently across patches, both horizontally and vertically, and networks have been developed. By incorporating four elements into a 2×2 array with series feeding, the design will be transformed into a 2×4 array with corporate-series feeding. A 2×4 array is designed using a corporate-series feeding technique; both the advantages of corporate and series feeding are obtained from this work. The corporate-series feed provided the highest gain and moderate transmission line loss among the three (series feed, corporate feed, and series-corporate feed). The project utilizes an inset feed line, which minimizes antenna size while enhancing gain, directivity, and the reflection coefficient. There is no requirement for impedance-matched transmission lines within the feed circuit. In this endeavor, a "both-sided" circuit technique is utilized, involving the arrangement of various categories of transmission lines on either side of the dielectric substrate, which is crucial for array antenna feed systems. Microstrip lines are positioned on the upper side of the dielectric substrate, whereas slot lines are situated on the reverse side. Through electromagnetic coupling, a novel feeding mechanism is developed. Previously, the array was a two-sided corporation. This array antenna has a two-sided series-corporate array (upper side and lower side) connected by a slot-microstrip and a v microstrip-slot branch line. Each patch element is connected by a 2.4 mm-width microstrip line in the whole network. This array structure is simple. It does not require structural changes through the use of stubs, transformers, multi-section transformers, taper lines, inductors, or capacitors. No impedance matching line is necessary throughout the complete feed system. Outstanding characteristics that significantly diminish undesirable cross-polarization have been verified. In particular, the advanced design system (ADS) developed by Agilent Technology, which is based on the method of moments, has been employed to confirm and assess the sizes of the suggested array antenna by utilizing the gain and directivity enhancement of antenna arrays. en_US
dc.description.sponsorship N/A en_US
dc.language.iso en en_US
dc.publisher CUET en_US
dc.relation.ispartofseries ;Tmail-19
dc.subject Microstrip Patch Antenna en_US
dc.subject 2×4 Microstrip Array Antenna en_US
dc.subject Series-Corporate Feed Network en_US
dc.subject Dual-Sided Feeding Technique en_US
dc.subject Corporate Feed Network en_US
dc.subject Antenna Array Design en_US
dc.title DESIGN OF A COMPACT MICROSTRIP ARRAY ANTENNA WITH SERIES-CORPORATE FEED BOTH-SIDED MIC NETWORK en_US
dc.type Thesis en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Advanced Search

Browse

My Account