Abstract:
The etching process was used to synthesized the MXenes (Nb2C, Ti2C, Ti3C2, Cr2C,
and V2C) utilizing their respective predecessors, MAX phases Nb2AlC, Ti2AlC,
Ti3AlC2, Cr2AlC, and V2AlC. The surface morphology and structural characteristics
of the material were examined using scanning electron microscope (SEM) and X-ray
diffraction (XRD). The SEM pictures are used to corroborate the layer architectures
of the MXenes. The estimated bandgaps range from 1.76 to 1.81 eV, aligning with
published values and suitable for light interaction and photodegradation processes.
The FTIR analysis further validates the functional group of the synthesized MXenes.
Higher degradation efficiencies of 96, 94, and 75% within 120, 160, and 160 minutes
are demonstrated by Nb2C, Ti2C, and Ti3C2. The etching of Al from the Nb2AlC,
Ti2AlC, and Ti3AlC2 MAX phases leads to enhanced surface area, which improves
the photodegradation performances. The findings align with the SEM pictures,
which unequivocally demonstrate the strong gaps formed by etching the middle
layer of their predecessor MAX phases. As a result, Nb2C, Ti2C, and Ti3C2 MXenes
can be suggested as a very efficient and rapid catalyst to address significant
environmental pollution issues. In this study, a theoretical investigation was done
for the radiation shielding capabilities of MXene materials using the Monte Carlo
simulation method. Here we use gamma radiation sources as 137Cs and we get
preventing dose rate by MXene materials in the range 19.6 to 8.8 mSv\h.