CUET DIGITAL REPOSITORY: Recent submissions

  • RED LIGHT VIOLATION MONITORING AND REPORTING USING MICROCONTROLLER CONTROLLED WIRELESS COMMUNICATION 
    Hossain, Mohammad Rubaiyat Tanvir; Bhuiyan, Tanvir Hassan; Bhowmik, Shovan; Khan, Ainul Anam Shahjamal (The School of Applied Sciences and Technology, Shahjalal University of Science and Technology, 2011-01-11)
    Traffic accidents are now one of the main causes of death and economic loss in most of the developed countries. Noncompliance with traffic laws is severely impeding the safety of the road traffic system. In this paper a ...
  • UNIFIED POWER QUALITY CONDITIONER (UPQC): DEVELOPMENT OF HARDWARE USING FACTS TECHNOLOGY 
    Khan, P.K. Shadhu; Hossain, M. R. Tanvir; Alam, Md. Rafiqul; Gupta, A. K. Sen (The School of Applied Sciences and Technology, Shahjalal University of Science and Technology, 2011-01-11)
    Unified Power Quality Conditioner (UPQC), a relatively new device, can be used simultaneously in voltage or current control mode in power distribution system. But development of hardware with appropriate control circuit ...
  • NUMERICAL INVESTIGATION OF THE BEHAVIOR OF RETROFITTED FLEXURAL CRACKED BEAM WITH EXTERNAL PLATE BONDING 
    Kaish, A. B. M. Amrul; Alam, Md. Rabiul; Hassan, Md. Kamrul; Ullah, Shah Neyamat (The School of Applied Sciences and Technology, Shahjalal University of Science and Technology, 2011-01-11)
    The aim of this paper is to study the effectiveness of using “External Plate Bonding” in flexural retrofitting of reinforced concrete (RC) beam. A simply supported rectangular RC beam is considered for this study. The ...
  • Conference on Engineering Research, Innovation and Education (CERIE 2011) 
    Chowdhury, Sajal; Alam, Dr. Md. Rabiul; Kabir, Humayun; Haque, Akkas U.; Banik, S. C.; T. Islam, M.; Kaish, A. B. M. Amrul; Alam, Md. Rabiul; Hassan, Md. Kamrul; Ullah, Shah Neyamat; Hossain, R. Tanvir; Khan, P.K. Shadhu; Alam, Md. Rafiqul; Gupta, A. K. Sen; Rahman, Md. Afikur; Zakaria, Md.Taufiqul; Hossain, Mohammad Rubaiyat Tanvir; Bhuiyan, Tanvir Hassan; Bhowmik, Shovan; Anam, Ainul; Khan, Shahjamal; Khan, P.K. Shadhu; Alam, Md. Rafiqul; Gupta, A. K. Sen; Hossain, M. R. Tanvir (The School of Applied Sciences and Technology, Shahjalal University of Science and Technology, 2011-01-11)
    The School of Applied Sciences and Technology, Shahjalal University of Science and Technology, Sylhet, organized a Conference on Engineering Education, Research and Innovation (CERIE), which held on January 11-13, 2011. ...
  • Design and Implementation of Smart Attendance Management System Using Multiple Step Authentication 
    Sarker, Dhiman Kumar; Hossain, Nafize Ishtiaque; Jamil, Insan Arafat (2016-12-12)
    In the traditional attendance system of Bangladesh, the teachers either call the name or identity number of the students to which the students respond or pass the attendance sheet to the students to sign. With the increase ...
  • Analyzing MRI Segmentation Based on Wavelet and BEMD using Fuzzy C-Means Clustering 
    Khaliluzzaman, Md.; Dolon, Lamia Iqbal; Deb, Kaushik (Department of Computer Science and Engineering, Faculty of Mathematical and Physical Sciences, Jahangirnagar University, 2016-12-12)
    Segmentation of images means a great matter for the medical field treatment purpose. For the extraction of brain polyps, magnetic resonance image (MRI) processing contributes in a wide range. Usually it works in two ways: ...
  • Community Participation As a Tool For Improving Solid Waste Management: A Case Study On Savar Municipality, Dhaka 
    Roy, Ridoy; Hasan, Md. Galib; Ishan, Rezaul Bari (Dept. of Civil Engineering, KUET, 2019-02-23)
    In the introductory chapter that has a general introduction to explain the importance of the issue and its relevance. It contains background of the study and introduction to the problem, objectives, rationale of the study, ...
  • Municipal Waste Management of Kushtia Municipality: Challenges and Opportunities 
    Kader, Md. Abdul; Paul, Sneha; Rahman, Md. Sainur; Parvez, Md. Amanullah; Ahmed, Ranver (Dept. of Civil Engineering, KUET, 2019-02-23)
    Municipal waste management is amongst of those most crucial issues of the world. Nowadays different international organizations i.e. WHO, ISWA etc. are working on introducing waste management system to ensure a better ...
  • ASSESSING THE IMPACT OF FAECAL SLUDGE OF TRAIN TOILET AT CHITTAGONG, BANGLADESH. 
    Sikdar, Md. Soumik; Tutul, Monishi Roy; Arpa, ZarinTasnim; Hasan, Muhammad Rashidul (Dept. of Civil Engineering, KUET, 2019-02-23)
    Chittagong is the second largest city of Bangladesh. In the perspective of Bangladesh railway is one of the most important and cost effective transport system. Everyday around 20 trains depart from the station in different ...
  • USE OF CRUMB RUBBER IN FLEXIBLE PAVEMENTS 
    Khan, Azam; Imam, Mahmood Omar; Roy, Anupom Deb (Dept. of Civil Engineering, KUET, 2018-02-09)
    In the modern era, nationwide connectivity is a precondition for the economic and social development. In Bangladesh, flexible pavements count about 98% of paved roads. But these conventional bituminous pavements are highly ...
  • TRAFFIC CONGESTION MONITORING IN THE SELECTED TRANSPORT AXIS OF CHITTAGONG CITY 
    Hossain, M. A.; Imam, M. O. (Dept. of CE, CUET, 2018-12-19)
    Over the last few years, the transportation problem of Chittagong City has visibly been deteriorating gradually. This study is dedicated to analyzing present traffic congestion in the selected major transport axis of ...
  • SEISMIC VULNERABILITY ASSESSMENT OF PRIMARY SCHOOL BUILDINGS AT CHITTAGONG CITY CORPORATION, BANGLADESH USING FEMA 310 
    Shahriar, M. F.; Walid, A. A.; Ali, S. B.; Bhuiyan, M. A. R. (Dept. of CE, CUET, 2018-12-19)
    Bangladesh is extremely vulnerable to seismic events because of its position near the boundary of tectonics plates. In this country, the primary school buildings have distinguished structural characteristics which cause ...
  • PROPERTIES OF PLASTIC AS A BINDING MATERIAL IN BUILDING BLOCKS 
    Rahman, T. B.; Jewel, S. N. (Dept. of CE, CUET, 2018-12-19)
    Plastic is a non-bio-degradable substance which takes thousands of years to decompose that creates land as well as water pollution to the environment. This study aims to evaluate plastic to use as building blocks. Selection ...
  • OPTIMUM FLYASH TO INCREASE THE STRENGTH OF SUBGRADE 
    Sarker, A.; Iqbal, M. B.; Rahman, M. M.; A-Noor, M. C.; Rahman, M. A; Islam, M. R. (Dept. of CE, CUET, 2018-12-19)
    Stabilization of problematic soils with fly ash not only improves engineering properties of soil but also provides a solution to challenges of fly ash disposal. Approximately 52,000 tons of fly ash produced annually at ...
  • FEASIBLE AND SUSTAINABLE COASTAL PROTECTION AND ADAPTATION STRATEGIES FOR COASTAL AREAS OF BANGLADESH 
    Khan, R. T.; Das, P (Dept. of CE, CUET, 2018-11-19)
    Bangladesh has about a 710 km long coastline with the Bay of Bengal at the southernmost part of the country. Due to the dynamic characteristics of the Meghna estuary, geographic location and climatic conditions, the coastal ...
  • IMPROVEMENT OF SKID RESISTANCE IN COASTAL HIGHWAYS USING CRUMB RUBBER 
    Imam, M. O.; Sen, J.; Rashid, S. U. (Dept. of CE, CUET, 2018-12-19)
    In Bangladesh, historical evidences show that accidents occur in the coastal areas especially in the Chittagong–Cox’s Bazar highway. Raw salt is often carried by truck from Cox’s Bazar to different parts of the country. ...
  • EXPERIMENTAL AND NUMERICAL INVESTIGATION ON FLEXURAL BEHAVIOR OF HIGH STRENGTH REINFORCED CONCRETE BEAM 
    Bhowmick, S.; Alam, M. J.; Mukhlis, M. R.; Bhuiyan, M. A. R. (Dept. of CE, CUET, 2018-12-19)
    The use of high strength concrete has become popular in construction work because of its improved strength and durability. High-strength concrete can be used as a substituting material over conventional concrete for ...
  • EVALUATION OF IN SITU MECHANICAL PROPERTIES AND QUALITY OF CONCRETE STRUCTURES BY NON DESTRUCTIVE TESTING 
    Ali, M. M.; Saeem, A. A.; Ahmed, M. S.; Ali, M. Z. (Dept. of CE, CUET, 2018-12-19)
    The non-destructive testing (NDT) of various components of reinforced cement concrete structures is becoming increasingly important for both economic and safety reasons in Bangladesh perspective. The modern NDT methods ...
  • EFFECTS OF LEACHING ON THE PROPERTIES OF MORTAR 
    Kuri, J.C.; Akter, S.; Choudhury, A. (Dept. of CE, CUET, 2018-12-19)
    Leaching of calcium and other ions from hydrates increases the porosity of cement based materials which has a negative effect on strength and durability. This study investigated the effects of leaching on the properties ...
  • COMPARISON OF FORCE BASED DESIGN AND DISPLACEMENT BASED DESIGN METHODS FOR SEISMIC RESPONSE OF MULTISPAN BRIDGES 
    Hoque, M. A.; Mukhlis, M. R.; Bhuiyan, M. A. R. (Dept. of CE, CUET, 2018-12-19)
    Multispan bridges are very common structures in transportation system. Generally, all the bridges are designed using force-based design (FBD) method. Though displacement correlates damage better than strength does, FBD ...